GALVANIZED SELF-SEAL FLASHINGS.
A galvanized base with a permanently attached self sealing
collar. Requires no mastic to seal off conduit. Rated to 180
degrees F. Not for use on hot mopped or
built up roofs. Available to accommodate conduit sizes from 1/2"
through 4". 18" x 18" based flashings are available for code
required areas. OTHER SELF SEAL FLASHINGS are also available
as listed below.
11830 1/2"-1"
packed 12/ctn
12201 1 1/4"-1 1/2"
packed 12/ctn
12202 2" packed
12/ctn
12203 3" packed
12/ctn
12204 4" packed
12/ctn
*ALUMINUM BASE SELF-SEAL(Also available with
18" x 18" base) Sizes from 1 1/4" through 4"
*COPPER BASE SELF-SEAL For use on Cedar
shake roofs, decorative, or coastal applications. Sizes from 1
1/4" through 4"
THERMOPLASTIC
SELF-SEAL A black thermoplastic corrosion proof base
with a moulded self sealing ring requiring no mastic sealer.
Excellent for coastal areas with salt spray. Available to fit
conduit sizes from 1 1/4" through 4". Also available with 18"
x 18" base for code required areas.
14101 1 1/4"-1 1/2"
packed 12/ctn
14102 2" packed
12/ctn
14103 3" packed
12/ctn
14104 4" packed
12/ctn
UNI-SEAL FLEX SELF-SEAL A
black flexible base to conform with most flat or contoured roof
surfaces including clay tile. Not for hot mopped or built up roofs.
A self sealing collar is moulded in. For conduit sizes from 1 1/4"
through 4", and including a special size for 2 1/2"
conduit.
30101 1 1/4-1 1/2"
packed 12/ctn
30102 2" packed
12/ctn
14026 2 1/2" packed
12/ctn
30103 3" packed
12/ctn
30104 4" packed
12/ctn
*GALVANIZED MULTI-SIZE SELF-SEAL
FLASHINGS
2 sizes fit all conduit applications from 1
1/2"-4". Also available with bases of ALUMINUM, COPPER, AND
THERMOPLASTIC.
12209 1 1/2"-3" packed
12/ctn
12210 3"-4" packed
12/ctn *special order
MASTER BOOT UNIVERSAL FLASHINGS
A multi-sized flashing that will adapt to profiled
roofs. The aluminum ring at the base will adapt to irregular
surfaces such as metal roofs with channels. One size covers all
applications from 1/2"-4". (Base 8" square)
16253 1/2"-4" packed
6/ctn
ARFCO DEKTITE EPDM rubber with
an aluminum sealing ring that will adapt to almost all surfaces
including metal roofs with channels. One size cover all
applications through 4".
14743 Base size 7
3/4"
fits 1/2"-4" conduit packed 5/ctn
14741 Base size 4 3/4" fits
1/2"-2" conduit packed 10/ctn
RETROFIT ARFCO DEKTITE A split
version of the DEKTITE that can be used to replace the flashing
around a service entrance without dropping the wires or removing the
weatherhead. 6 1/3" base.
14751 3/4"-2 1/2" packed 10/ctn
ALL LEAD FLASHINGS All sizes
available from 1/2" through 4" with 6" risers. Higher risers or
special bases available. Lead flashings are shipped direct
from the manufacturing plant and cannot be included in freight
allowed orders. Most items can be shipped within 24 hours of
order via UPS. **
** Stocked in Pacific Northwest.
Special order elsewhere. No freight allowance on all lead
flashings.
IF YOU HAVE A SPECIFIC APPLICATION THAT REQUIRES
ASSISTANCE FROM US, PLEASE SEE THE "CONTACT US"
PAGE TO GET THE INFORMATION YOU
NEED. | 
